Product
Number |
1421 |
1504 |
1510 |
1520 |
| Product
Description |
1421
- Textured film premask that will stretch and conform for
specific applications. This product has the added benefit
of adhesion to liner.
1500
Series - Unique clear film application tapes with
dimensional stability for use where precise registration is
required.
Designed
to assist in the application of decals that have been cut
into letters and legends.
Available
in three tack levels. |
| Tape
Thickness
PSTC-33 (mils) |
6.8 |
4.6 |
4.6 |
4.8 |
| Adhesion
to Steel
PSTC-101 (180°, oz./in.) |
13
MED-HIGH |
4.5
LOW |
9
MED |
19
HIGH |
| Tensile
Strength
PSTC-31 (lbs./in.) |
15 |
18 |
18 |
18 |
| Elongation
PSTC-31 (%) |
870% |
600% |
600% |
600% |
| Typical
Uses |
- Die
cut and laminated decals
- Heat
vacuum applications
|
- Pre-spaced
lettering >12" in one dimension
- One-piece
decals >12" in one dimension
|
- Pre-spaced
lettering 2-12" high
- Decals
or lettering <12" in one dimension
- Fine
line striping
|
- Pre-spaced
lettering <12" high
- Heavily
weeded, thermal die cut decals
|
| Click
Here If You Would Like To Order A Sample |
| Applications
Recommendations - The performance of all adhesive products is
affected by many factors: heat, humidity, type of substrate,
texture, inks used and application technique. Our suggestions
and recommendations concerning the use and application of our
products are based on tests we believe are reliable. However,
the purchaser must test the suitability of our products for
his intended use under his own operating conditions. American
Biltrite Inc. assumes no liability for claims beyond the replacement
value of any defective products, and is in no way liable for
consequential or incidental damages. These products are not
suitable for prolonged outdoor exposure. |
