Product
Number |
693F |
6931 |
6932 |
| Product
Description |
Extra-heavy
paper tapes that offer excellent paint hold out for stencil,
spray mask and frisket applications.
Available
in self-wound (6931), on creped liner (6932) or on a flat
liner for plotter use (693F). |
| Tape
Thickness
PSTC-33 (mils) |
7.5 |
7.5 |
7.5 |
| Adhesion
to Steel
PSTC-101 (180°, oz./in.) |
18 |
18 |
18 |
| Tensile
Strength
PSTC-31 (lbs./in.) |
18 |
18 |
18 |
| Elongation
PSTC-31 (%) |
9% |
9% |
9% |
| Typical
Uses |
- On
flat liner for computer cutting applications
- Available
in 50 yard lengths
|
- Stencil
or spray mask with superior paint hold out
- Available
up to 47" x 100 yard length
|
- On
creped liner for steel rule die cutting operations
- Available
in 25 and 50 yard lengths
|
| Click
Here If You Would Like To Order A Sample |
| Applications
Recommendations - The performance of all adhesive products is
affected by many factors: heat, humidity, type of substrate,
texture, inks used and application technique. Our suggestions
and recommendations concerning the use and application of our
products are based on tests we believe are reliable. However,
the purchaser must test the suitability of our products for
his intended use under his own operating conditions. American
Biltrite Inc. assumes no liability for claims beyond the replacement
value of any defective products, and is in no way liable for
consequential or incidental damages. These products are not
suitable for prolonged outdoor exposure. |
